• 电话:0531-88273263
  • 传真:0531-88273263
  • Q  Q:497759781 1511259211
  • 手机:18653127035 15866644035
  • 地址:济南市历城区工业北路与幸福柳路向北150米路东(幸福柳广场北邻)
数字沙盘当前位置:首页-数字沙盘
    沙盘模型在制作完毕之后应该如何正确保养
    2016-6-15 16:26:39
    在前面的文章中,小编给大家介绍的都是沙盘是怎样制作的,没给大家介绍沙盘模型在制作完毕之后应该如何正确保养呢?那今天我们济南模型公司小编就主要给大家介绍一下这个问题:
    In front of the article, Xiaobian to introduce are sandbox is how to make, no give you the sand table model in the production of finished should how to properly maintain? That today we Ji'nan model company small series on the main to give you a brief introduction to this problem:
    1、有遥控的沙盘模型须谨严保管遥控器,且不要频繁使用,否则轻易造成遥控电路失效。
    there must be careful to keep the sand table model remote control remote control, and do not frequently used, otherwise easily cause the remote control circuit failure.
    2、放置沙盘模型的室内应保持干净、透风,没有玻璃罩的模型应常常清扫。模型应派专人看守,不能让小孩触摸,以防损坏。
    put the sand table model of indoor should be kept clean, ventilated, no glass model should often clean. Model should send someone to watch, can not let the child touch, in case of damage.
    3、在模型完工之后,应该由模型公司配备专人进行运送工作,运送至现场经模型公司安装调试后才能使用,以免在后期造成不必要的麻烦。
    after the model is completed, it should be equipped with a model company to carry out the work, transported to the scene after the model company to install and debug to use, so as not to cause unnecessary trouble in the late.
    4、放置沙盘模型的室内温度不得超过35摄氏度,且保持在30%到80%的相对湿度,否则沙盘模型轻易脱胶变形。不能让阳光直射,更不能在阳光下曝晒。
    placing the sand table model of indoor temperature shall not exceed 35 degrees Celsius and maintained at 30% to 80% relative humidity, otherwise the sand table model easily degumming deformation. Don't let the sun, but not in the sun.
    5、沙盘模型的灯光不应长时间开放,要在每两个小时关一次,如有真水喷泉的沙盘模型应常常检查是否有水(因水在不断蒸发),若水量不足应及时加水,一旦发现喷泉不喷水,应立刻封闭电源开关,否则会导致损坏。
    sand table model of the light should not be open for a long time, and in every two hours off once, if really water fountain of sand table model should often check whether there is water (water in the constant evaporation), if the water shortage should be timely water, once found fountain not water, should be immediately closed switch power source, otherwise it will cause damage.